Standard-size pieces up to 36” on the longest side.

For larger pieces requiring heavier hardware or precise placement.

For oversized artwork over 48” or heavier pieces (typically 40–80 lb). Includes reinforced hardware, specialty anchors, and advanced leveling.

Based on size, weight, and surface type. Heavier mirrors (50-100 lb) require specialty mounting and custom safety hardware.

Custom pricing. For very large or heavy pieces requiring two-person handling, French cleats, structural anchors, or engineered mounting solutions.

Based on size, weight, and location.

Gallery wall layout (3+ pieces in a designed layout): +30% on total hanging cost. Includes uniform spacing measurements, visual composition, and mapping.

For installations over 8 ft from floor, stairwells, or special access. Starts at +$50 depending on setup and safety requirements.

🛠 Wall patching included if needed (for holes up to 1/4”)

For larger panels requiring heavier-duty anchors and careful handling. If no one is available to help lift 66” and up, add +$50 for a second installer.

Price depends on mounting style (under-TV, discreet brackets, or custom alignment). Mounting brackets priced separately if required.

Labor + cable covers included. Clean, leveled cable raceway installation. Custom 45°/90° turns: +$20 each (precision-cut for seamless corners).

Labor only. Hole covers and in-wall kits charged separately. Final price depends on stud layout, insulation, and surface type.

Labor only. Installed behind or near TV depending on design and power availability.

Same as base price — no extra charge (unlike other installers).

Non-standard surfaces - Priced per project

Installations with mounting points over 8 ft from floor, stairwell setups, or special access – start +$50 and up, depending on complexity

TV mounts, in-wall kits, media boxes, and other equipment are not included in labor pricing and are billed separately if supplied.

Small / Standard shelves (up to 24”) – from $30 each (based on size, weight, and location)

Large / Heavy shelves (over 24”) – from $50 each (based on size, weight, and location)

Floating shelf systems or multi-shelf layouts – Priced per project.

Heavy-duty storage shelving – Priced per project (based on setup and complexity)

Motorized or non-motorized ceiling shelving – Priced per project (based on setup and complexity)

Priced per project (based on setup and complexity)

Installation into brick, concrete, metal, tile, or other challenging surfaces – Priced per project.

Installations with mounting points over 8 ft from floor, stairwell setups, or special access – start +$50 and up, depending on complexity.

2-hour minimum billed. Additional hours charged at $80/hr.

Based on mounting location and cable routing.

Priced per project (based on setup and complexity).

Based on setup and complexity.

Smart Devices (video doorbells, smart locks, thermostats, etc.) – $100 and up (based on setup and complexity)

Priced per project (based on setup and complexity).

Installation into brick, concrete, metal, tile, or other challenging surfaces – Priced per project.

Installations with mounting points over 8 ft from floor, stairwell setups, or special access – start +$50 and up, depending on complexity.

Based on type, size, weight, and location. (Measured across the full span of treatment, including rods/tracks for outside mounts or total panel width for multi-panel systems)

Based on type, size, weight, and location. (Measured across the full span of treatment, including rods/tracks for outside mounts or total panel width for multi-panel systems)

Based on type, size, weight, and location (Measured across the full span of treatment, including rods/tracks for outside mounts or total panel width for multi-panel systems)

Complex surfaces may require additional labor, resulting in slightly higher pricing.

Installations with mounting points over 10 ft from floor, stairwell setups, or special access – start +$50 and up, depending on complexity

Includes first hour of labor, small tools, and travel within service area.

• Replacing faucets, shower heads, and other plumbing fixtures
• Light fixture replacement or installation
• Custom painting of various items(awnings, railing, equipment, etc)
• Minor painting & touch-ups
• Cabinet painting, adjustments, and repairs
• Furniture repairs, tightening loose screws, fixing hinges or moving mechanisms
• Wall repairs & patching (small areas)
• Hanging small fixtures or décor
• Baseboard/furtiture repairs, including damage from pets (chewing/scratching)
• Refinishing, repainting, or restoring damaged areas to like-new condition
• General home maintenance and problem-solving

💬 All handyman services are priced per project, based on scope and complexity.

Work on brick, concrete, metal, tile, or other challenging surfaces – Priced per project.

Work over 8 ft from floor, stairwell setups, or special access – start +$50 and up, depending on complexity.

Based on size, weight, and location. Includes drilling into exterior surfaces (vinyl, wood, or brick), premium masonry anchors/fasteners, precise leveling, and secure mounting.

Included with installation. If no installation is needed, removal is $20 per shutter.

Installation into stone, tile, or other challenging surfaces – Priced per project.

Second and third floor installations – priced higher due to ladder access, setup time, and safety requirements.